·cone crusher
·PYG Multi-cylinde Hy
·PYS Symons Cone Crus
·PYY(Z) Single Cylind
·PXP Series Spinning
·VSI-type Vertical Sh
·PEVA High-Efficiency
·PESV Type Deep-Cavit
·ZG-PEX, PEX Type Fin
·PE Type Jaw Crusher
·ZG-PE Type Jaw Crush
·PF Type impact Crush
·PC, PCA Type Hammer
·PCB, PCC Type Hammer
·YK Type Circular Vib
·LXS Screw Wash-sand
·GBZ heavy-duty plate
·ZGC Eccentric Heavy
·ZSW Linear Type Vibr
·2PG Type Double Roll
·2PGX Type Double Rol
·2PGCQ Series High-Te
·PLGS Series High-eff
·PD External Swinging
·Belt Conveyor Series
    Product display > PYG Multi-cylinde Hydraulic Cone Crusher

Purpose: This machine is suitable for processing gravels, ores, slags and construction waste, and used for second, three or four level crushing of stones and slags. Working principle: The motor drives rotation of eccentric locking collar through bell pulley and gear. And. the spindle shall drive deflection of crushing wall and produce extrusion with rolling mortar wall. When material enters the crushing chamber through upper hopper, it will be extruded and crushed and discharged out of the cru^iing wall, so as to achieve cru^iing effect. By adjusting (he size of discharging opening, we can get appropriate material particle size. Characteristics: This machine uses hydraulic clearing system, which reduced downtime and maintenance [xocess in a safe and an efficient way. Its unique hydraulic overload protection system can automatically release foreign matters in machine body such as iron block and can reset inrmedidtely to ensure system normal operation.The new structure integrates safe cylinder and cleaning cylinder, making the machine more compact. The method of adjusting the discharge opening changes to hydraulic rotary unit gear adjustment from push cylinder drive. Therefore. the adjustment is more fast and smooth and work efficiency improved greatly. Note: The processing capacity of crusher in the chart is the designed through pot on the condition that the following requirements are met. a) Material moisture content should be less than b} Under open process, feed particle size is of appropriate uniformity, which ^iould be less than (he materiai size of discharge opening and \0% of total feed amount. c) Material bulk density is 1.6t/m3, and compressive strength is 140MPa~150MPa.

Technic Parameters

COPY right:Shandong Datong  Copyright©2009 All rights reserved. E-mail:[email protected]